User's Guide Pocket Electronic Page 13
The Midi master channel is used to select which channel the PE will transmit on when using
relevant presets (i.e. presets using the master channel). Some presets (such as the MIDI
volume - preset 0) has each input on a different channel, whilst other presets have all inputs
on the same channel, it is on these presets that the Master channel is used. The master
channel is also the channel which the PE will receive program change data on. To set the
master channel, hold the snapshot switch down for at least one second and keep it held
down, the LED then stays on to indicate the master channel setting mode (do not let go of
the button until the required value has been selected). In this mode the inputs become
channel selectors, and do not transmit the normal control data. To select a channel, simply
move one of the potentiometers or operate one of the switches connected to JP1 or JP2 that
relates to the channel required (to set channel 5, move potentiometer/switch in input #5). If
you accidentally operate the wrong potentiometer or switch, just operate the correct one, as
it is the last potentiometer/switch operated that determines the actual Master channel set.
•
to reset the PE after a Midi overflow at the Midi input
To clear any Midi input error such as a Midi overflow (too much data in one go), press the
snapshot switch briefly once (do not press it again until at least one second has passed, or
this would enter the snapshot mode).
Functions of the DIP switch
The eight DIP switches select the number of the preset that is called up after power on. The
settings of the DIP switch can be looked upon as a binary number where each switch can be
either on or off. This allows up to 256 values to be selected from the eight DIP switches.
A switch is referred to
1
when it is in the
ON
position, and referred to
0
in the
OFF
position. The
on or off (or both) position is printed or labelled on the DIP switch. Only seven of the switches
are actually used to select one of the 128 available presets. The eighth switch is not used at
present and has no functions, but it is good practice to leave it in the OFF position, as a future
update may make use of this switch position.
The switches are numbered one to eight. The upper switch (near the capacitor C3 or restistor
R8) is switch number one, the lower switch (near IC2/25LC64) is switch number eight.
The following listing, lists all the available presets that are shipped in the PE (i.e. the factory
presets). These presets may be modified with the free editor software mentioned earlier. The
presets are described in detail in the appendix.
Up to 128 different presets are available. If none of the factory presets can be used the editor
program enables the user to program his own presets.
(8 Seiten)
(10 Seiten)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern