Doepfer USB64 Universal Midi and USB Controller Electronic Bedienungsanleitung

DOEPFER MUSIKELEKTRONIK GMBHDOEPFER MUSIKELEKTRONIK GMBHDOEPFER MUSIKELEKTRONIK GMBHDOEPFER MUSIKELEKTRONIK GMBH USB64 Universal Cont

Page 10 User's Guide V1.3 USB64 In both cases an additional resistor is required (possible range 4k7 to 100k) to pull the analog input to a

USB64 User's Guide V1.3 Page 11 Configuration of the USB64 The configuration of the USB64 is carried out by several jumpers that have to be

Page 12 User's Guide V1.3 USB64 The following table shows the relation between the settings of the jumpers 5…8 of JP1 and the corresponding

USB64 User's Guide V1.3 Page 13 As the scanning of the 64 inputs is analog even in this mode (i.e. analog-to-digital conversion) the scanning

Page 14 User's Guide V1.3 USB64 Normal operating mode: This is the usual working mode. In this mode the LED flashes for about 2 seconds after

USB64 User's Guide V1.3 Page 15 (8) Pin header JP13 JP13 was used to choose the type of power supply. If an external power supply was used t

Page 16 User's Guide V1.3 USB64 Mounting Before USB64 is put into operation the board has to be fixed on a suitable support and built into a

USB64 User's Guide V1.3 Page 17 Dimensions Dimensions USB64

Page 18 User's Guide V1.3 USB64 Check list In case that your USB64 installation does not work at the first go please check the following it

USB64 User's Guide V1.3 Page 19 Extent of delivery The USB64 delivery contains the following parts: • USB64 pc board, assembled and tested

Table of contents Table of contents...

Doepfer Musikelektronik www.doepfer.com Doepfer Musikelektronik GmbH Geigerstr. 13 D-82166 Graefelfing / Germany Phone 49 89 898

USB64 User's Guide V1.3 Page 3 Electrical safety / EMC compatibility USB64 is a so-called OEM product (OEM original equipment manufacturer) t

Page 4 User's Guide V1.3 USB64 Warranty • Applying any negative voltage (< 0V) or positive voltage above +5V (> +5V) to one of the 64

USB64 User's Guide V1.3 Page 5 Introduction • USB64 is an universal electronics DIY kit to built your own Midi control box. Up to 64 control

Page 6 User's Guide V1.3 USB64 Connection and Installation Please pay attention to the following notes ! Electronic basic knowledge is requi

USB64 User's Guide V1.3 Page 7 Overview: USB64 Connections (3) external power supply 7-12V/100mA DC (BU3) (1) MIDI IN (BU1) (2) MIDI OUT (

Page 8 User's Guide V1.3 USB64 USB connector (4) If the data generated by USB64 has to be transmitted via USB the socket (4) is connected to

USB64 User's Guide V1.3 Page 9 The right part of the sketch shows the pin out of the pin headers. Normally 10 pin female connectors with ribb